We are doing kinds of cast aluminum fence,cast aluminum railings,and cast aluminum guardrails, which do not need to be painted and maintained. The color cast aluminum fences originated in Europe and the United States. They have been widely used in the 1970s and have formulated industry standards. The use of color aluminum alloy fences in China is just at the beginning. Unfamiliar, we do not realize the substantive perfection of color cast aluminum alloy fences, so from the design unit to the user unit is still circling along the route of traditional wrought iron fence, cast iron fence, plastic steel fence, wood fence and inferior stainless steel fence, we can all see the unhealthy phenomena of fragility, decay, continuous rust stains and the addition of yellow robes, which seriously pollutes the construction of civilized cities and threatens people’s health and safety of life and property. Therefore, repeated investment in dismantling and replacing guardrails is very serious.. For example: when the consumer buys a new house decoration, the guardrail looks neither rusty nor cold. According to incomplete statistics, more than 85% of the owners of the new house decoration replaced the guardrail or cut off the guardrail, and the urban road isolation fence has become a few. The annual change has resulted in repeated financial investments. With the rapid development of the national economy and the needs of people's lives, the replacement of guardrails is imperative, and the development prospects are broad.
Features of aluminum alloy fence:
1. The production and installation are simple and fast, and the patented buckle connection is adopted to greatly improve the installation efficiency.
2. There are many varieties and specifications, you can choose a variety of styles, both European and American style and current fashion, showing noble and modern beauty.
3. Safe and environmentally friendly, harmless to humans (livestock), even if it accidentally touches the guardrail, it will not hurt people like steel or iron guardrail.
4. The guardrail has sufficient strength and impact resistance.
5. Adopt special spraying or oxidation, anti-ultraviolet, no fading, no yellowing, no peeling, no cracking, no foaming, no worms, and the life of aluminum alloy fence can reach more than 60 years
1. Sand casting&Gravity casting&Low pressure die casting:
|Service||Sand casting, Gravity casting, high pressure die casting,low pressure die casting and CNC Machining casting.|
Equipment of Casting
|1. High pressure die casting machining:125T/180T/250T/280T/500T/800T/1250T|
2. Gravity casting machine: 7 production lines
3. Low pressure die casting machining: 1 production line
4. Sand casting machine: 6 production lines
5. Degassing equipment and opportunities to refine the material
6. Machining: 9 Sets CNC Machines; 5 sets Milling machines; 3 setsTurning machines; 20 sets drill and tap machines
|Testing Facility||Spectrometer, Tensile test device, Hardness test device, CMM, X-Ray, Leaking test device|
|CNC turning, Milling, Drilling, Grinding, Cutting, Reaming and Threading|
|Finished||Polishing, Sand blasting, Heat treatment, Painting, Powder coating, Anodizing, Electroplating, Chrome plating, Mirror polishing.|
|Products||All kinds of Cast aluminum productions: Including Vehicle industry,Medical device industry, Marine industry, Lighting industry,Oil&Gas Transporttation industry, Electric Utility & Communication Industries, Architectural industry and Furniture industry so on|
From design to cast aluminum fence, One-stop Solutions for you. And we can do cast aluminum fences as your design, welcome to send me
Casting parts are very heavy, package must be strong. Our package material is wooden crate which is Fumigation free.
And we can pack productions as customers' requirements
? More than 25 years in castings and machining process; so we have much experience for your projects.
? Passed ISO9001 : 2015 & TS16949 : 2009
? Have four casting types in our factory; you can find the four process in one factory, save cost for your company
? From Casting to Finished surface, Owned casting, polishing and plating workshops, one-stop, We can offer Good quality and strict delivery time.
? With samples and order: We can offer dimension report, Chemical composition and Mechanical properties
? Control material with spectral and thermal analysis equipment (density and processing)
? Spectral analysis of raw material and liquid melt, batch before casting.
? Transportation Advantage:
A) Near Sea Port and Air Port-Ningbo Sea Port and Yiwu Airport or Hangzhou Airport;
B ) From Shanghai to our factory by Fast train directly, takes two and half hours; From Hangzhou to our factory, only takes one hour
Q1. Are you trading company or manufacturer
We are factory, We are only doing cast aluminum and machining more than 20years, we have much experience in this industry. If you find some "factory" can do kinds of material castings(steel, iron,stainless,cooper.......), we are sure they are trading company. If you have other material castings to do, we can introduce for you free. It is our pleasure that we can help you.
Q2. How to get quotation from your factory?
We need a 3D CAD solid model to prepare a First Quote interactive quote. All of the Firstcut processes are dependent on good 3D CAD solid models. Two-dimensional (2D) drawings are not adequate for quoting or making parts.
We can accept native SolidWorks (.sldprt) or ProE (.prt) files as well as solid 3D CAD models from other CAD systems output in IGES (.igs), STEP (.stp), ACIS (.sat) or Parasolid (.x_t or .x_b) format.
Q3. When can I get the price?
We usually quote within 48 hours after we get your inquiry. If you are very urgent, please call us or tell us in your email so that we will regard your inquiry priority.
Q4. How about your lead time?
1): Toolings &Samples
Sand Casting will take 15 to 30 days after receiving your advance payment.
Gravity casting, low pressure die casting, high pressure die casting will take 30 to 60days after receiving your advance payment.
2) Mass production
The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings. We can build drawings for you after we get your samples too.
Q6. What is your sample policy?
We can supply 1pcs sample free (value under USD15/PCS) after we finish as your drawings, but the customers have to pay the freight cost. If you need more samples, you have to pay the samples cost.
Q7. Can we use your current tooling? Or can we get samples which are shown on your website?
No, we can't do it.
We only accept OEM orders and do casting parts as your drawings or samples. We can't sell any production or design to any third body. We can't show any photos on website without our clients' allowance. We signed NDA with all clients, all tooling and drawings belong our clients. We only use the tooling to make productions for one client. The client can take way the tooling any time after tooling cost.
Q8. Do you test all your goods before delivery?
Yes, we have 100% test before delivery
Q9: How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.